
Successful graffiti removal comes down to three things: acting quickly, matching the method to the surface and testing on a hidden spot first. Smooth surfaces such as glass, metal and engineering brick can usually be cleaned completely with a graffiti remover and hot water, while porous render and soft natural stone need gentler techniques and often several passes. Afterwards, an anti-graffiti coating makes the next incident far easier to deal with. This guide explains the methods, their limits, the most common mistakes and realistic prices in Vienna, Graz, Linz and Salzburg.
What does graffiti removal actually involve?
Graffiti removal means taking spray paint, paint markers, felt-tip tags and sticker residue off facades, walls, gates, roller shutters, shop windows and street furniture without damaging what lies underneath. It sounds simple, but it is really applied materials science. Aerosol paint is made of pigments, binders and solvents. On a dense surface it sits on top as a film; on an absorbent surface such as lime render, sandstone or unglazed brick it soaks several millimetres into the pores.
That difference decides the approach. Professionals broadly work with three families of techniques:
- Chemical stripping: a graffiti remover or paint stripper, usually as a gel, softens the paint so it can be rinsed away.
- Thermal and mechanical removal: hot-water pressure washing, steam or dry ice blasting lift the softened or embrittled paint off the surface.
- Gentle abrasive blasting: low-pressure blasting with a very fine medium removes a microscopically thin layer when chemistry alone is not enough.
In practice these are combined. A good contractor does not choose by habit but by substrate, age of the graffiti, type of paint and the weather on the day.
Why graffiti should be removed fast
1. One tag invites the next
Walk through any city and you will notice it: painted walls rarely stay at a single tag. A surface where graffiti is left for days sends the message that nobody cares. Property managers and shop owners consistently report that walls cleaned promptly are hit again far less often. Speed is therefore the most effective – and cheapest – form of prevention.
2. Fresh paint comes off more easily
In the first few days the paint has not fully cured and has not penetrated as deeply. After weeks of sun, rain and frost the binder cross-links, pigments lock into the pores and the risk of a permanent shadow rises sharply.
3. Property value and first impressions
For shops, surgeries, offices and residential blocks, the facade is the business card. A tagged entrance looks neglected, puts customers off and can give prospective tenants the impression that the building is poorly managed.
4. Police report and insurance
In Austria, painting someone else’s property without permission can be prosecuted as criminal damage under section 125 of the Criminal Code (StGB), which explicitly covers defacing. In practical terms, owners should take dated photos before anything is cleaned, roughly measure the affected area and report the incident to the police. Whether your buildings insurance pays depends on the policy; vandalism and graffiti are often only covered by an optional add-on. This is general information, not legal advice – your insurer, property manager or a lawyer can help in the individual case.
Which method suits which surface?
| Surface | Usually suitable | Watch out for |
|---|---|---|
| Mineral render | Gel remover, hot water at moderate pressure, several passes | High pressure tears out the aggregate, ghosting likely |
| Painted render, external wall insulation | Mild removers, often repainting up to the next edge | Solvents lift the paint finish too, insulation render is thin and pressure-sensitive |
| Facing brick, clinker | Gel remover plus hot water, gentle abrasive blasting if needed | Soft mortar joints, porous handmade bricks |
| Granite and other hard stone | Alkaline remover, hot water, dry ice | No abrasives on polished surfaces |
| Limestone, marble, sandstone | Poultices, neutral to alkaline pastes, conservation methods | No acids, no coarse blasting, check heritage status |
| Painted or powder-coated metal | Removers rated for painted surfaces, short dwell time | Strong solvents dissolve the original coating |
| Stainless steel, anodised aluminium | Mild removers, soft cloths, dry ice on stainless steel | Anodising is damaged by strong alkalis, no scouring products |
| Glass | Solvent and glass scraper, cloth and squeegee | Scratches on toughened glass, etched tags cannot be washed off |
Graffiti removal step by step: how professionals do it
The basic rule of facade cleaning applies here as well: work from top to bottom and from clean to dirty. Otherwise dissolved paint and dirty water run over areas that are already clean and leave streaks. And always start with the mildest method that works, escalating only when it does not.
- Assessment: identify the substrate, the type of paint (aerosol, marker, paint pen, bitumen) and any existing coating, and take photos for the police and insurer.
- Test on a hidden spot: on a small, inconspicuous test patch, the product, dwell time, temperature and pressure are tried out. Only when the surface looks unchanged after drying does work move to the visible area.
- Protect the surroundings: cover windows, doors, plants, pavement and cars, cordon off the area and lay out absorbent mats or trays to catch run-off.
- Apply the remover: brush the gel or paste on from top to bottom, work it lightly into porous surfaces and respect the manufacturer’s dwell time. The product must not dry out.
- Rinse: wash off with hot water at a suitable pressure using a fan nozzle, top to bottom, keeping distance and angle constant.
- Second pass: repeat locally on remaining pigment; for stubborn shadows, use a poultice or gentle abrasive blasting after another test.
- Neutralise and rinse again: remove all remover residue so that no tide marks or efflorescence appear.
- Dispose of waste water: dissolved paint and solvents do not belong in the storm drain or the flower bed; they are collected and disposed of properly.
- Let it dry and inspect: only a dry surface shows whether any shadow remains. That is when rework or a protective coating is decided.
The main methods explained
Graffiti removers and paint strippers: there are solvent-based and alkaline products, mostly in gel form so they cling to vertical surfaces. They are the backbone of almost every job. Personal protective equipment, the safety data sheet and compatibility with the substrate all matter – a product that is perfectly fine on clinker brick may soften a uPVC window sill next to it.
Hot-water pressure washing: hot water softens binders and flushes out dissolved paint much better than cold water. The key is not maximum pressure but the right balance of temperature, pressure, nozzle and distance. On soft render or old mortar joints, too much pressure does more damage than the graffiti ever did.
Dry ice blasting: small pellets of frozen carbon dioxide are fired at the surface with compressed air. They chill the paint instantly, make it brittle and knock it off. The ice turns straight into gas, leaving no blasting residue. It works well on metal, stainless steel and hard stone, but it is loud and of limited use on very absorbent surfaces because it barely reaches pigment that has soaked deep into the pores.
Gentle abrasive blasting: low-pressure vortex systems apply a very fine medium with little water and low pressure. They remove an extremely thin layer and can pull shadows out of mineral surfaces. Because every abrasive method takes away some material, it belongs in experienced hands and only after a test patch.
Ghosting: when an outline stays behind
Sometimes a faint outline of the tag is visible after cleaning. This ghosting has two possible causes. Either pigment is still trapped deep in the pores – in which case further passes, a poultice that draws the paint out of the stone or gentle blasting will help. Or the cleaned patch is simply cleaner than the surrounding facade, which has collected years of grime. The result is a bright patch that is just as distracting. Here it makes sense to clean the area up to a natural break such as a window reveal, cornice or plinth. On painted render, repainting in exactly the right colour up to the next edge is often the neatest solution.
Anti-graffiti coatings: permanent or sacrificial?
Once the wall is clean, a protective coating is worth considering wherever graffiti keeps coming back. It stops paint from penetrating the pores and makes future removal quicker and cheaper.
- Permanent coatings: film-forming systems, often polyurethane- or fluoropolymer-based, stay on the surface during cleaning and survive many removals. They can slightly change gloss and colour and reduce breathability, which can be a problem on mineral and historic facades.
- Sacrificial coatings: wax or polysaccharide systems wash off together with the graffiti and are then reapplied to the affected area. They are usually vapour-permeable and visually discreet, but every incident brings a follow-up cost.
- Semi-permanent coatings: sit in between and survive a few cleans before they need topping up.
The right choice depends on the substrate, how often the wall is hit and the look you want. For the plinth zone of a commercial building a permanent coating is often the economical option; for an old lime-rendered facade a breathable sacrificial coating is usually the safer choice.
Listed buildings
Vienna, Graz, Linz and Salzburg have many historic facades. If a building is listed, any intervention that could change its fabric or appearance should be agreed in advance with the Austrian Federal Monuments Office, the Bundesdenkmalamt. This applies above all to abrasive methods and permanent coatings. For valuable stone or stucco, a qualified conservator is the right person to involve. Prompt, gentle cleaning with a test patch is generally still possible.

Fee from Bling Bling: Before anyone reaches for a rag and thinners: photograph first, then test a small corner. A smeared paint stain on render is much harder to shift than a cleanly sprayed tag.
You make the mess – we make it disappear
How much does graffiti removal cost? Guide prices 2026
Depending on the job, pricing is per square metre, a flat rate for small areas or by time spent. One-off jobs are charged from 50 euros per hour net plus travel. The table shows guide prices excluding VAT; the fixed price is set after a site visit or based on clear photos.
| Service | Vienna | Graz | Linz | Salzburg |
|---|---|---|---|---|
| Small area up to approx. 2 m², flat rate | from approx. €190 | from approx. €180 | from approx. €180 | from approx. €200 |
| Smooth surfaces: glass, metal, clinker (per m²) | €15–30 | €14–28 | €14–28 | €16–32 |
| Render and porous surfaces (per m²) | €25–50 | €24–48 | €24–48 | €26–52 |
| Natural stone, poultice or abrasive blasting (per m²) | €40–90 | €38–85 | €38–85 | €42–95 |
| Sacrificial anti-graffiti coating (per m²) | €8–18 | €8–17 | €8–17 | €9–19 |
| Permanent anti-graffiti coating (per m²) | €20–45 | €19–43 | €19–43 | €21–47 |
| Repainting, touch-ups, small jobs | by time, from €50 per hour net plus travel | |||
Guide prices – fixed price after a site visit. The main price drivers are the substrate, type of paint, age of the graffiti, area, working height (ladder, scaffold or mobile platform), access and whether a protective coating follows. If you would like the whole facade refreshed, have a look at our facade cleaning in Vienna page or the general facade cleaning overview.
How working with us works
Things move fastest if you send an overview shot and a close-up of the graffiti with your enquiry – the substrate can often be identified from those alone. During the site visit we prepare a test patch and clarify whether scaffolding or a mobile platform is needed and whether a protective coating makes sense. You then receive a fixed price, and the team arrives on the agreed date. What other customers say about us: 4,8 stars from 200 reviews.
Common graffiti removal mistakes
- Skipping the test patch: a product that works on the garage door may leave permanent marks on the limestone next to it.
- Rubbing with thinners: the solvent dilutes the paint and the rag pushes it deeper into the pores. A crisp tag turns into a large, smeared shadow.
- Full pressure from close range: render gets washed out, joints are blasted empty, and wood and soft stone are left with permanent jet marks.
- Acid on limestone, marble or lime render: acidic cleaners attack the stone itself and leave dull, rough patches.
- Painting over just the tag: a colour that does not match exactly stands out immediately and invites the next tag. If you repaint, go up to the next edge.
- Waiting too long: cured, sun-baked paint is harder to dissolve, and the wall remains a magnet for more graffiti.
- No photos before cleaning: without documentation you have nothing to show the police or the insurer.
- Hosing run-off into the drain: dissolved paint and solvents pollute water and must be collected.
- No protection on hotspots: if the same plinth is cleaned several times a year, skipping an anti-graffiti coating means paying the full cost every time.
Checklist: getting graffiti removed
- Dated photos taken and area roughly measured
- Incident reported to the police
- Buildings insurance policy checked for vandalism cover
- Property manager or owners’ association informed
- Heritage status clarified
- Substrate and any existing coating identified
- Test patch done on a hidden spot and assessed when dry
- Surroundings, windows and plants covered
- Cleaning carried out from top to bottom
- Run-off collected and disposed of properly
- Surface checked for ghosting, reworked up to the edge if needed
- Decision made on anti-graffiti protection for hotspots
- Procedure agreed for future incidents so that you can react fast
Graffiti removal FAQ
How soon should graffiti be removed?
Ideally within a few days, once it has been photographed and reported. Fresh paint comes off more easily, and walls that are cleaned quickly tend to be targeted again much less often.
Can I remove graffiti with my own pressure washer?
Cold water alone does very little against aerosol paint without a graffiti remover and heat. High pressure on render or mortar joints also causes damage easily. On small, smooth areas a careful attempt after a hidden test is possible.
Why is there still a shadow after cleaning?
Either pigment is still trapped in the pores, or the cleaned patch is brighter than the dirty surroundings. The first calls for extra passes or a poultice, the second for cleaning up to the next natural edge.
How do you remove graffiti from brick?
Dense clinker brick usually cleans well with a gel remover and hot water. Soft, porous bricks and old mortar need lower pressure, several passes and sometimes gentle abrasive blasting after a test patch.
Can graffiti be fully removed from natural stone?
On hard stone such as granite, usually yes. Soft, porous stone like sandstone or limestone is harder and needs poultices, gentle blasting and patience. A faint shadow can remain.
How do you get graffiti off a shop window?
Soften it with a suitable solvent and lift it with a cloth, squeegee or carefully with a glass scraper. Scrapers can scratch toughened glass. Etched or scratched tags cannot be washed off and need polishing, film or a new pane.
What is the difference between a permanent and a sacrificial anti-graffiti coating?
A permanent coating stays on the surface when graffiti is cleaned off and lasts through many removals. A sacrificial coating washes off with the graffiti and is reapplied, but it is usually breathable and well suited to historic facades.
Does insurance cover graffiti removal in Austria?
It depends on your policy. Many buildings insurance policies only cover vandalism and graffiti through an add-on. Photos and a police report are usually needed to make a claim, so check with your insurer.
What does graffiti removal cost per square metre?
As a guide in Vienna, roughly 15 to 30 euros net per square metre on smooth surfaces and 25 to 50 euros on render. Natural stone needing special methods costs more. Small areas are charged as a flat rate, with a fixed price after a site visit.
Report graffiti and ask for a fixed price
Send us a few photos and a short description of the affected area. We assess the substrate, suggest the right method and, if needed, arrange a site visit with a test patch. You can find more about our facade work on the facade cleaning Vienna page.

Fee says: The sooner we see the graffiti, the easier it comes off – and the less likely it is to come back.
You make the mess – we make it disappear
Sie machen Dreck – wir machen's weg
